BS2-IO-01 IO-module

Connection from external sensors and actuators
Use for sequential circuit
Activities and functions are remote-controlled, or controlled using the module’s push buttons

Product Info

BS2-IO-1 modules each allow up to 8 external sensors and actuators to be connected. The modules can be used for sequential circuit. For instance, fans can be switched off. All activities and functions can be remote-controlled and manually controlled via the IO module’s push buttons.

Mains connection 230 V, 50 Hz with Europlug and 1.5 m connection cable.
Power supply unit for the system electronics. Microfuse, T 2.5 A, replaceable via front side.
LEDs for displaying operational data.
Push buttons for manual operation.
Plastic casing 250 mm x 110 mm, 85 mm height. Protection class II, protection rating IP40.
Modules permanently store data, even in the event of a power failure.
Real-time clock with leap year correction and switches to daylight saving/standard time. Initial charge time of the buffer capacitor 30 minutes, discharge time 31 days.
Galvanically isolated CAN bus connections with plug-in screw terminals.
Data cable: Twisted pair 1 x 2 x 0.34 mm², 120 Ω, shielded. Length between modules up to 100 m.
8 galvanically isolated inputs (24 V DC) according to EN 61131-2 (Type 1) for external sensors. Connections with plug-in screw terminals.
8 galvanically isolated outputs (24 V DC / 0.6 A) according to EN 61131-2 for external actuators. Connections with plug-in screw terminals.
24 V DC for inputs and outputs on site.